InfoComm2017 was an exciting show and no one felt it more than Danley Sound Labs. There were a lot of exciting things to see and hear in the demo room. However, those who ventured out to the Danley Sound Labs booth on the show floor were treated with the opportunity to see the new eight channel Danley Sound Labs DNA series amplifiers.
Danley Sound Labs introduced two new DNA series amplifiers, the DNA 10K8 Pro and the DNA 3K8 Pro. Both of the new eight channel amplifiers share a lot of features in common with the DNA four channel Pro series amplifiers. These features include:
-Four analog inputs with thru connections
-One AES3 input
-Available with or without Dante
-Ethernet communications for software control with System Engineer
-2 Rack units tall
-Front panel for easy operation without a computer
-Four Neutrik NL-4 loudspeaker connections on the back panel
-Aux port on the back for connecting to power sequencing systems and fire mute systems
-Neutrik 32A Powercon Power Inlet connector for the built in universal power supply
-Pairs of channels are able to be bridged for higher output
-Selectable to directly drive 25V, 70V, and 100V lines on a per channel basis
-96KHz sampling rate for all DSP operations
-Powerful grouping and multilayer control of gains, delays, and EQ
-Designed and manufactured in the United Kingdom
The DNA eight channel Pro series amplifiers are just like the four channel amplifiers with two exceptions:
1. There are twice as many channels… obviously.
2. The eight channel amplifiers are capable of the same output power into all loads.
Wait, what is that? Yes, that is correct. The DNA 10K8 Pro amplifier outputs 1250W into an eight, four, or two Ohm load and 70V and 100V loads as well. Meanwhile, the DNA 3K4 Pro amplifier is capable of 400W into all loads as well. There is a DSP setting in the amplifier channel that must be adjusted to the load for maximum output.
DNA 10K8 Pro
8 Ohm = 1250W
4 Ohm = 1250W
2 Ohm = 1250W
70V = 1250W
100V = 1250W
DNA 3K4 Pro
8 Ohm = 400W
4 Ohm = 400W
2 Ohm = 400W
70V = 400W
100V = 400W
The DNA 10K8 Pro and DNA 3K8 Pro amplifiers are available now, so contact your dealer for pricing and availability.
The current version of System Engineer is 7.00.15. This version is available for download from our website:
The current version of firmware for the DNA 10K4 Pro and DNA 20K4 Pro amplifiers is 1.306.
The current version of firmware for the DNA SC48 is 1.394.
Loudspeaker Master Preset Stack version is 20170424
The firmware and loudspeaker presets are included in the System Engineer download zip file for System Engineer 7.00.15.
DNA product videos can be found on our website: