If you are receiving this newsletter it's probably because you are an Innovator, ready to adopt new technologies to improve your life, and we are working for that!
We've been working really hard these months and it's been worth it. We exhibited at BikeUp in Lecco, Italy, gathering a lot of awesome feedbacks and suggestions. Several top news sources covered our BEST conversion kit such as RedBull, Bicilive , InSella , SportOutdoor24 , Corriere.it .
Did you miss the BikeUp show and you want to give us your suggestions? You can do that by filling out our surveys and you can win your Bikee Bike BEST kit at our lucky draw! Enhance your odds to win your kit!
From the BikUp experience, we understood we can contribute in clarifying the concepts around e-bikes: for that reason we updated our website adding the most common e-bike terminology in our Tech section. If you want to understand more about Watt-Hours, Volts and Amperes, just go there and you'll find everything you need to know.
Bikee Bike team at BikeUp during
the Bike Garage session.
Bikee Bike Board of Directors at BikeUp, in Lecco, Italy. From the left: Matteo Spaggiari ( Founder and CEO ), Luca Spaggiari (Founder and COO), Jari Ognibeni (Board member from our parnter Industrio). The bike we installed the BEST kit on is from our friends at Ekletta. See all the pictures here.
Our partners at Industrio are doing a great job in supporting us. From the BikeUp we got feedback to improve the battery holder design and reduce its volume. We are working on that.
Industrio is a StartUp accelerator who believed in Bikee Bike and is now an active part of our team.
The Start of Production is still forecasted for Jan 2015, but all our January batch kits are already reserved. To make sure you'll receive your kits in February 2015, you can reserve it at our reservation page here. There will only be 50 kits available in the February batch. Also you will secure your 20% discount on the retail price by reserving now.
Meanwhile we'll be completing the final design, we'll post some video of our testing phase in approx two months. So stay tuned for some good action to come!
By now you can check our installation video here. That's the first prototype and we are working on perfecting all the assembly procedure, but you can have a good grasp of how easy it is to install the kit onto your bike.
We are planning some open days for you to test the kits in our production plant in Rovereto, TRENTO, Italy. As we are in the process to move there, we'll give you additional details about the exact date in the next newsletter release.